B.MuthuKumaran

Designation: Assistant Professor (OG)
Mail: muthukumaran.b@ktr.srmuniv.ac.in
Area :Applied Electronics
Affiliation: Department of Electronics and Communication Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Kattankulathur - 603203
Phone number :  2070
Email id : muthukumaran.b@ktr.srmuniv.ac.in

 

Education
M.Tech Applied Electronics

Sathyabama University.Chennai, 2012

B.E Electronics and Communication Engineering

Madras Institute of Technology,Chennai, 2008

Other Details

Course

  • Microwave &Optical communication ,Electron devices, Digital systems, Linear Integrated Circuits,Mobile computing, Embedded system, Electronic Measurements & Instrumentation, Basic Electronics.

Research Interests

  • Optical Communication

Academic Experience

  • Assistant Professor (O.G), SRM university, Department of ECE , Kattankulathur Campus since June 2012
  • Lecturer in The New Royal College Of Engineering,Chennai From Jan 2011 to May 2012

Selected Publications:

  • B.Muthukumaran"“Online Active Noise Control System Design and Implementation” International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (IJAREEIE), Volume 5, Issue 5, May 2016
  • Chandra Sekhar Muramalla, B.MuthuKumaran,"Color Vision Robot", International Journal of Science, Engineering and Technology Research ,(IJSETR)-VOL-4-ISSUE-4,April -2015

International Conferences

  • Athivivek. and   Muthukumaran.B  “Driver Drowsiness Detection System Using Fusion Of Video And Bio-Signals”  International Conference on Communication and Signal Processing - ICCSP' 13. April 2013. Melmaruvathur, Tamilnadu, India. Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu,
  • Anantharaj and Muthukumaran.B,”Applying Effective Dynamic Frequency Scaling Method in Contactless Smart Card ,” International conference on Science and Innovative Engineering”April 2014.
  • Sirenjivi and Muthukumaran.B,”Design of signal through scheme based low power pulse triggered flipflop” , International conference on Science and Innovative Engineering”April 2014

Seminars / Workshops Attended

  • Participated in 30 th GISFI Standardisation Series Meeting & IEEE 5G Summit,16-17,November 2017 in SRM University, Kattankulathur, Chennai.
  • Participated in Three Days National workshop on “ Internet of things for Industrial Applications” CSIR-CEERI Centre, Chennai 4-6 Dec 2016
  • Participated in TWO day Workshop on PHOTONICS AND PHOTOVOLTAIC DEVICES held on 1st  and 2nd August 2016 Conducted by Department of ECE , SRM University, Kattankulathur, Chennai and Optical society 0f India
  • Participated in a Two-week ISTE workshop on Analog Electronics Conducted By Indian Institute Of Technology, Kharagpur.in SRM University, Kattankulathur, Chennai From 4th to 14th June, 2013
  • Two days Refresher Course on Embedded Hardware Design, Conducted by the Department of Electronics  and Communication Engg.,  SRM University, Kattankulathur, Chennai
  • Attended FDP on National level workshop on NS2 during 21,22 august 2010 in Sathyabama University,Chennai
  • Attended one day Hands on training session on How to get started with Opti system on 29th september  in SRM University Conducted by Department of ECE.

Working Papers:

  • Nagaraj, B.Muthukumaran ,“An Embedded based automatic speed control using fuel injection technique digitized road signal alert, in International Conference on Recent Trends in Computing and Information Technology - -2017

Work in Progress:

  • An efficient Data-Oriented Messaging Mechanism for Industrial IOT

Academic Experience:

  • Worked as Lecture in The New Royal Engineering College from January 2011 to May 2012

Other Professional Experience:

  • Handling Electronic prototyping course for AEC Business School(TEMASEK POLYTECHNIC) in
  • SRM University, Kattankulathur, Chennai from 2014 to 2017
  • Lab Instructor, KCG College of Technology from June 2009 to January 2011
  • Lab Instructor, Panimalar Polytechnic from June 2000 to April 2008.

Memberships

  • ISTE- LM105912
  • Optical society of India fellow member No.1460

 

 

 

 

 

 

Dr-T-Muthuramalingam
Dr. T. Muthuramalingam

Assistant Professor (Sr.G.)

Mail:muthuramalingam.t@ktr.srmuniv.ac.in
Area: Mechatronics   
Affiliation: Department of Mechatronics Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University)

Education
Ph.D Mechanical Engineering Anna University, 2014
ME Mechatronics

Anna University, 2008

BE Electrical and Electronics Engineering

Anna University, 2006

Other Details:

Course

  • Intelligent Manufacturing Technology;
  • Fluid power drives and control
  • PLC and data acquisition Systems
  • Electrical Drives and control
  • Power Electronics
  • Sensors and Signal Conditioning

Research Interests

  • Unconventional Micro Machining
  • Manufacturing Automation
  • Process Optimization and Design of Experiments,
  • Energy Conservation.

Selected Publications

  • T Geethapriyan, R Manoj Samson,T Muthuramalingam,  A C Arunraj, “Stiffness Analysis of Inverted Tripod Parallel Manipulator,” Applied Mechanics and Materials, 867, 205-211, 2017.
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, A Rajadurai, “Performance analysis of process parameters on machining α-β titanium alloy in electrochemical micromachining process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Accepted for publication, 2017.Impact factor: 1.366
  • G Anbuchezhiyan, B Mohan, D Sathianarayanan, T Muthuramalingam, “Synthesis and characterization of hollow glass microspheres reinforced magnesium alloy matrix syntactic foam,” Journal of Alloys and Compounds, 719(1), 125-132, 2017.Impact factor: 3.133
  • D Saravanakumar, B Mohan, T Muthuramalingam, “A review on recent research trends in servo pneumatic positioning systems,” Precision Engineering, 49(1), 481-492, 2017.Impact factor: 2.237
  • T Muthuramalingam, S Vasanth, T Geethapriyan, “Influence of Energy Distribution and Process Parameters on Tool Wear in Electrical Discharge Machining,”International Journal of Control Theory and Applications, 9(37), 353-359, 2016.
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, “Multi Performance Optimization of Electrochemical Micro-Machining Process Surface Related Parameters on Machining Inconel 718 using Taguchi-grey relational analysis,” La Metallurgia Italiana, 2016(4), 13-19, 2016. Impact factor: 0.298
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam, “Multi Performance Optimization of Electrochemical Micro-Machining Process Surface Related Parameters on Machining Inconel 718 using Taguchi-grey relational analysis,” La Metallurgia Italiana, Accepted for Publication, 2016. Impact factor: 0.227
  • S Vasanth, T Muthuramalingam, P Vinothkumar, T Geethapriyan, G Murali,  “Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process,” Procedia CIRP, 46(1), 139-142, 2016. SNIP: 0.490
  • T Geethapriyan, K Kalaichelvan, T Muthuramalingam,  “Influence of coated tool electrode on drilling Inconel alloy 718 in Electrochemical micro machining,” Procedia CIRP, 46(1), 127-130, 2016. SNIP: 0.490
  • T Muthuramalingam, S Vasanth, P Vinothkumar, G Murali,  “Effect of pulse duration and flushing pressure on performance measures in EDM process,” Australian Journal of Basic and Applied Sciences, 9 (32), 66-70, 2015. SNIP: 0.230
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam,  S Venugopal,  “Performance analysis of wire electrodes on machining Ti-6Al-4V alloy using wire electrical discharge machining process,” Machining Science and Technology, 19(4) ,577-593,  2015. Impact factor: 0.703
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, “Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on machining Titanium alloy in WEDM Process,” Indian Journal of Engineering and Materials Sciences, 22 (2), 181 – 186, 2015. Impact factor: 0.413
  • T Muthuramalingam, B Mohan, D Saravanakumar, “Evaluation of Surface Finish of Electrical Discharge Machined AISI 304 Stainless Steel With Various Pulse Generators,” Applied Mechanics and Materials, 772 (1), 279 – 283, 2015. SNIP: 0.330
  • D Saravanakumar, B Mohan, T Muthuramalingam, “A study on influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology,” Applied Mechanics and Materials, 789 (1), 901-905, 2015. SNIP: 0.330
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, S Venugopal, “Multi-Response Optimization of Wire -EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis,” Applied Mechanics and Materials, 772 (1) , 245 – 249, 2015. SNIP: 0.330
  • A Ramamurthy, R Sivaramakrishnan, T Muthuramalingam, S Venugopal, “Application of Taguchi-Grey relational methodology for multiple optimal performance measures in WEDM process,” Applied Mechanics and Materials, 766- 767 (1) , 861 -866, 2015. SNIP: 0.330
  • S Vignesh, B Mohan, T Muthuramalingam, S Karthikeyan, “Evaluation of Recast layer thickness of Electrical Discharge Machined AISI 202 Stainless Steel With Various Pulse Generators,” Applied Mechanics and Materials, 766- 767 (1) , 518 -522, 2015. SNIP: 0.330
  • T Geethapriyan, GM Gopal, K Kalaichelvan, T Muthuramalingam, “Analyzing the effect of Electrochemical Micromachining process parameters on Alpha-Beta Titanium,” International Journal of Mechanical Dynamics & Analysis, 1(1), 18-22, 2015.
  • T Muthuramalingam, B Mohan, “Application of Taguchi-grey multi responses optimization on process parameters in electro erosion,” Measurement, 54(1) , 495-502, 2014. Impact factor: 1.484
  • T Muthuramalingam, B Mohan, A Jothilingam, “Effect of tool electrode re-solidification on surface hardness in electrical discharge machining,” Materials and Manufacturing Processes, 29(11-12), 1374-1380, 2014. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “A review on influence of electrical process parameters in EDM process,” Archives of Civil and Mechanical Engineering, 15 (1), 87 – 94, 2014. Impact factor: 1.793
  • T Muthuramalingam, B Mohan,  A Rajadurai, D Saravanakumar, “Monitoring and fuzzy control approach for efficient electrical discharge machining process,” Materials and Manufacturing Processes, 29(3) , 281-286, 2014. Impact factor: 1.629
  • D Saravanakumar, B Mohan, T Muthuramalingam, “Application of response surface methodology on finding influencing parameters in servo pneumatic system,” Measurement, 54(1) , 40-50, 2014. Impact factor: 1.484
  • T Muthuramalingam, B Mohan, “Performance analysis of iso current pulse generator on machining characteristics in EDM process,” Archives of Civil and Mechanical Engineering, 14(3), 383-390, 2014. Impact factor: 1.793
  • T Muthuramalingam, B Mohan,  A Rajadurai, M D Antony, “Experimental investigation of iso energy pulse generator on performance measures in EDM ,” Materials and Manufacturing Processes, 28(10) , 1137-1142, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Influence of tool electrode properties on machinability in electrical discharge machining,” Materials and Manufacturing Processes, 28(8) , 939-943, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Influence of discharge current pulse on machinability in electrical discharge machining ,” Materials and Manufacturing Processes, 28(4) , 375-380, 2013. Impact factor: 1.629
  • T Muthuramalingam, B Mohan, “Design and fabrication of control system based iso current pulse generator for electrical discharge machining,” International Journal of Mechatronics and Manufacturing Systems, 6(2) , 133-143, 2013. SNIP: 0.258
  • T Muthuramalingam, B Mohan, “A study on improving machining characteristics of electrical discharge machining with modified transistor pulse generator ,” International Journal of Manufacturing Technology and Management, 27(1/2/3) , 101-111, 2013. SNIP: 0.330
  • T Muthuramalingam, B Mohan, “Enhancing the surface quality by iso pulse generator in EDM process ,” Advanced Materials Research, 622-623(1) , 380-384, 2013. SNIP: 0.158
  • T Muthuramalingam, B Mohan, “Taguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining ,” Indian Journal of Engineering and Materials Sciences, 20(6) , 471-475, 2013. Impact factor: 0.413
  • T Muthuramalingam, B Mohan, “Multi response optimization of electrical process parameters on machining characteristics in EDM using Taguchi-DEAR methodology,” Journal of Engineering and Technology, 3(1), 57-60, 2013. Impact factor: 0.2
  • D Saravanakumar, B Mohan, T Muthuramalingam, “Optimization of Proportional Fuzzy Controller for Servo Pneumatic Positioning system using Taguchi - DEAR Methodology,” Journal of Engineering and Technology, 4(2), 115-118, 2014. Impact factor: 0.2
  • T Geethapriyan, K Kalaichelvan, A.Rajadurai, T Muthuramalingam, S Naveen, “A Review on Investigating the effects of process parameters in electrochemical machining,” International Journal of Applied Engineering Research, 10 (2), 1743- 1748, 2015. SNIP: 0.330
  • T Muthuramalingam, R Parasuraman, B Mohan, “Analysis of machining characteristics with different pulse generators in electrical discharge machining ,” Journal of Engineers Today(1), 14 , 143-146, 2012.

Papers Presented 

International Conferences Abroad

  • With S Vasanth, P Vinothkumar, T Geethapriyan, G Murali,  “Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process,” in Proc. HPC 2016, Germany, 2016.
  • With T Geethapriyan, K Kalaichelvan, “Influence of coated tool electrode on drilling Inconel alloy 718 in Electrochemical micro machining,” in Proc. HPC 2016, Germany, 2016.
  • With S Vasanth, P Vinothkumar, G Murali, “Effect of pulse duration and flushing pressure on performance measures in EDM process,” in Proc. ICMME 2015, Bangkok, 2015.
  • With B  Mohan, D Saravanakumar, “Evaluation of Surface Finish of Electrical Discharge Machined AISI 304 Stainless Steel With Various Pulse Generators,” in Proc. ICMMC, Singapore, 2014.
  • With D Saravanakumar, B Mohan, “A study on influence of system parameters on servo pneumatic system and multi-response optimization using Taguchi – Grey methodology,” in Proc. ICMMC, Singapore,2014.
  • With A Ramamurthy, R Sivaramakrishnan, S Venugopal, “Multi-Response Optimization of Wire -EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis,” in Proc. ICMMC, Singapore, 2014.

International Conferences in India

  • With K Jaswanth, K Selvashankar, G Sooryaprakash, S Mahesh, S Vasanth, “Design and development of modified pulse generator for electrical discharge machining,” in Proc. ICARM 2017, Chennai, 2017.
  • With R Prasanna, S Akalya, Ashwin, P Vinothkumar, “Design and development of low cost direct extruder 3D printer using mechatronics approach,” in Proc. ICARM 2017, Chennai, 2017.
  • With Ravi Akash, R Dilipkumar, K Shravan, S Vasanth, “Influence of process parameters of Laser Beam Machining on machining AISI304 SS,” in Proc. RIPE 2017, Chennai, 2017.
  • With T Geethapriyan, R Manoj Samson, A C Arunraj,  “ Stiffness analysis of inverted tripod parallel manipulator,” in Proc. TAMMIE 2016, Coimbatore, 2016.
  • With T Geethapriyan, A C Arunraj, R Manoj Samson, “ Optimization of machining parameters in wire-cut EDM on pure Titanium using Response Surface Methodology,” in Proc. ICCMEET 2016, Coimbatore, 2016.
  • With G Kumaresan, “Multi dome test of super plastic forming in Magnesium alloy to investigate strain rate sensitivity index ,” in Proc. IMagcon 2016, Chennnai, 2016.
  • Single author paper, “Influence of energy distribution on surface hardness in Electrical Discharge Machining ,” in Proc. ISCA 2016, Mysuru,2016.
  • With T Geethapriyan, K Kalaichelvan, G Kumaresan, “Experimental Investigation of Electrochemical Machining (ECM) Process Parameters on Micro Holes in Inconel 718,” in Proc. APM 2015, IISc Bengaluru, 2015.
  • With T Geethapriyan, K Kalaichelvan, A Rajadurai,  S Naveen , “A Review on Investigating the Effects of Process Parameters in Electrochemical Machining,” in Proc. ICET 2k15, 2015.
  • With A Ramamurthy, R Sivaramakrishnan, S Venugopal, “Application of Taguchi-Grey relational methodology for multiple optimal performance measures in WEDM process,” in Proc. ICAMME, 2014.
  • With S Vignesh, B Mohan, S Karthikeyan, “Evaluation of Recast layer thickness of Electrical Discharge Machined AISI 202 Stainless Steel With Various Pulse Generators,” in Proc. ICAMME, Chennai, 2014.
  • With B Mohan,  “Fuzzy based computational methodology   pulse generator for improving surface finish in EDM,” in Proc. ICICCA,2013.
  • With R Parasuraman, B Mohan, “Performance evaluation of iso current pulse generator in Electrical Discharge Machining,” in Proc. INCACMA, 2012.
  • With R Parasuraman, B Mohan, “Effect of pulse generators on machining characteristics in electrical discharge machining,” in Proc. INCACMA, 2012.
  • With R Parasuraman, B Mohan, “Effect of tool material in thermal erosion process,” in Proc. INCACMA, 2012.
  • With B Mohan,  “Optimization of material removal rate in EDM process using orthogonal array with regression analysis,” in Proc. SET, 2012
  • With B Mohan,  “Enhancing the surface quality by iso pulse generator in EDM process,” in Proc. ICMST, 2012.
  • With A Senthilnathan, B Mohan,  “Design and fabrication of pulse generator for micro EDM process, ” in Proc. INCRAME, 2011.
  • With A Senthilnathan, B Mohan,  “Improvement of micro EDM process using high frequency transistor iso duration discharge current pulse generator,” in Proc. ICGMSM, 2011.
  • With A Senthilnathan, B Mohan,  “Design and fabricaton of iso discharge current pulse generator with servo feed control for micro EDM ,” in Proc. ICMTIC, 2011.
  • With M Anbarasan, “Sensor based automatic pallet pick up fork lift trucks for industrial environment,” in Proc. ICDF,2008.

National Conferences in India

  • With T Geethapriyan, K Kalaichelvan, “Influence of process parameters on machinability of Inconel 718 in Electro chemical micro machining process,” in Proc. NCARMS, 2016.
  • With A Ramamurthy, S Vasanth, M Mohammed Rabik, T Geethapriyan, “Multi response optimization of EDM process parameters using assignments of weight method,” in Proc. NCARMS, 2016.
  • With T Geethapriyan,  K Kalaichelvan, G Madhana Gopal , “Analysis the Effect of Electrochemical Micromachining Process Parameters on Alpha-Beta Titanium,” in Proc. NCMTFC,2015.
  • With K Harishkumar, “A study on energy conservation in industrial drive systems,” in Proc. NCETIME, 2013.
  • With B Mohan, “Experimental investigation of pulse generators in Electrical Discharge Machining,” in Proc. NCETIME, 2013.
  • With R Parasuraman, B Mohan, “Analysis of machining characteristics with different pulse generators in electrical discharge machining,” in Proc. NCCAME, 2012.
  • With M Chandramohan, “Reactive power compensation of  lighting system to improve the power factor in industries,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Sensor based pallet pick up fork lift trucks for intelligent material handling,” in Proc. NCRTES, 2011.
  • With A Senthilnathan, B Mohan, “High efficiency pulse generator for micro EDM process,” in Proc. NCRTES, 2011.
  • With M Chandramohan, “Energy auditing and conservation in aerospace industry,” in Proc. NCETIME, 2011.
  • With B Mohan,   “PWM aided switching for producing spark in micro EDM,” in Proc. NCETIME, 2011.
  • With M Chandramohan, “Energy utilization of electric drives by adopting conservation techniques in industries,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Evolving colour based segregate material handling,” in Proc. NCRTIME, 2011.
  • With B Mohan, “Pulse parameter analysis of thermo electric process,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Path detection robot of automated guided vehicle by IR sensor,” in Proc. NCETIME, 2011.
  • With M Anbarasan, “Automatic fork lifter for variable pallet pick up using colour sensor,” in Proc. AIRPAM,2008.

Workshops Attended

  • Two days workshop on Advanced Materials Characterization and Techniques held at CEG campus, Anna University, Chennai on February 23-24, 2015.
  • Faculty Development Program on Applied Hydraulics and Pneumatics held at Madras Institute of Technology, Anna University, Chennai on June 4-10, 2012.
  • Faculty Development Program on Engineering Materials and Metallurgy held at Madras Institute of Technology, Anna University, Chennai on December 5-12, 2012.
  • Faculty Development Program on Applied Hydraulics and Pneumatics held at Madras Institute of Technology, Anna University, Chennai on June 13-19, 2011.
  • Advance training programme on Programmable systems on chip (PSoC) based embedded control system held at Advanced Training Institute(Government of India), Chennai on June 27- July 1, 2011.
  • Advance training programme on CNC programming and machining on 4 axis die sinker EDM (For tool & die making) held at Advanced Training Institute(Government of India), Chennai on September 05 – 16, 2011
  • Faculty Development Program on Introduction to Finite Element Analysis held at Madras Institute of Technology, Anna University, Chennai on December 1- 7, 2011.
  • Staff Development Program on Robotics for Manufacturing held at Madras Institute of Technology, Anna University, Chennai on December 10-23, 2011.

Academic Experience

  • Assistant Professor(Sr.G), Department of Mechatronics Engineering, School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), July 2017 – Till now
  • JRF(FT) and visiting faculty(PT), Department of Production Technology, MIT Campus, Anna University, 2010-2014
  • Lecturer, Prathyusha Institute of Technology and Management, 2009-2010

Other Professional Experience

  • Application Engineer, Kamalam Group of Company, 2006-2008.
  • Research Forum Organizer, Department of Production Technology, MIT Campus, Anna University, 2010-2013
  • Maintenance Manager, Kamalam Group of Company, 2013-2014
  • Scrutiny Committee Member - NCMTFC 2015 conducted by SRM Institute of Science and Technology (formerly known as SRM University), India
  • General Chair Member - EPEE 2016, Thailand

Editorial Board Member 

  • International journal of manufacture system and design - published by Journalspub 
  • International Journal of Production Engineering - published by Journalspub 

Reviewer 

  • Ain Shams Engineering Journal- published by Elsevier
  •  Alexandria Engineering Journal- published by Elsevier
  • Archives of Civil and Mechanical Engineering - published by Elsevier
  • Engineering Science and Technology, an International Journal - published by Elsevier
  • Journal of Engineering Manufacture - published by Sage
  • Journal of Power and Energy systems - published by Elsevier
  • Machining Science and Technology - published by Taylor & Francis
  • Materials and Manufacturing Processes - published by Taylor & Francis
  • SpringerPlus – published by Springer
  • Transactions of the Indian Institute of Metals – published by Springer

Chairperson at Conferences

  • NCARMS 2016 conducted by MIT, Anna University, Chennai, India
  • ICMME  2015 conducted by IPN Thailand chapter at Bangkok, Thailand
  • AUTOHUNT 2K15 conducted by BSA University, India
  • ETME 2K15 conducted by SRM engineering college, India

Technical Committee Member at Conferences

  • AMTIA 2016, China
  • EAME 2015, Thailand
  • CMSE 2015, China
  • IRP
  • IACSIT
  • IPN Thailand chapter

Achievements and Awards

  • Best research paper award at RIPE2017, Chennai, India.
  • Gold medalist during SRM research day 2017,  Chennai, India.
  • Outstanding reviewer award from “archives of civil and mechanical engineering” by Elsevier
  • Best research paper award at NCARMS2016, Chennai, India.
  • Gold medalist during SRM research day 2016,  Chennai, India.
  • Best research paper award at ICMMC2014, Singapore.
  • Anna Centenary Research Fellow 2011, India.
 

 

 

 

 

Ms. Mydhili Pavuluri
Ms. Mydhili Pavuluri

Assistant Professor (O.G)
Email id: mydhili.p@ktr.srmuniv.ac.in
Area: Control & Instrumentation
Affiliation:  Department of Electronics and Instrumentation Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University).

Education
M.E Control & Instrumentation Anna university, Chennai, 2011

Other Details:

Courses

  • VLSI design & Embedded systems
  • Communication Systems
  • Analytical instrumentation
  • Virtual instrumentation

Research Interest

Selected Publications:

  • Implementation of controllers using dsp processors
  • DSP based implementation of grid connected inverter

Working Paper

  • Hardware in loop simulation of soft switched grid connected inverter using dsp processor

Academic Experience: 

  • Hardware in loop simulation of soft switched inverter using dsp
  • Assistant Professor , SRM Institute of Science and Technology (formerly known as SRM University), Chennai since  June 2011 to till date

 

Pages